Why Round Domed Solar Road Studs Are a Smarter Safety Solution

Shining The Light On A Wise Choice In Cat Eye Studs

Round domed solar road studs are more than modern upgrades. They are a proven safety innovation.

According to an article published by IOL in April 2023, over 55% of fatal crashes in South Africa happen at night, despite reduced traffic volumes. This highlights just how crucial visibility is after dark.

These high-visibility markers store solar energy during the day and automatically light up at night. This provides earlier warnings and reduces the chance of collisions in critical areas.

Whether you’re upgrading a bend, entry point, or high-traffic zone, these solar studs are built to deliver lasting performance with minimal effort.

• The dome shape increases multi-angle visibility, ideal for curves, slopes, and blind spots.
• High-luminance LEDs on both sides enhance visibility for up to 800 metres.
• Automatic light sensor activation. It turns on at dusk and off at dawn.
• These last 3 to 5 times longer than traditional reflective markers.
• Super-strong polycarbonate cover and aluminium shell made with impact resistance in mind.
• Stud-free mounting option for guardrails or barriers.
• IP68 waterproof rating makes them reliable in heavy rain and flooding.
• Self-cleaning design means less maintenance.

How Domed Solar Road Studs Work

After charging in daylight, the stud can run for up to 180 hours in flashing mode or 100 hours steady on a full charge. Automatic light sensors ensure zero energy waste.

Each unit contains:

• A mono-crystalline 2V/0.3W solar panel
• NiMH 1.2V/600mA battery
• 2 x 5mm high-luminance LEDs per side
• Pre-set modes for a steady or flashing light

Where to Use Domed Solar Road Studs

According to the South African National Roads Agency (SANRAL), the implementation of LED road studs on sections of the N2 and N3 highways has contributed to a 35% reduction in nighttime lane-departure incidents, particularly in fog-prone and poorly lit areas.

This finding shows us that a choosing Cat’s Eyes as one of your road safety products is a no-brainer. They are simple, versatile and effective tool that can be placed in many different areas. Specifically, they are best used in:

• Blind spots and dangerous corners
• Intersections and pedestrian crossings
• Parking zones and barrier sides
• Warehouses, logistics yards, and private estates
• They’re also ideal for off-grid locations or in rural areas where wiring is difficult or costly.

Installation Made Simple

Installing domed solar road studs is a fast and effective process that requires minimal tools and downtime.

Their compact shape and built-in solar panel make them self-sustaining. Therefore, there’s no need for wiring or trenching. With just a few steps, you can reinforce road safety and improve nighttime visibility for years to come.

Installation is straightforward:

• Clean the surface. Remove dust, oil, and debris.
• Apply epoxy glue in the shell. For best results, we recommend using a 3:1 epoxy for long-term adhesion
• Each box purchased from us at Venture Plastics Distributors contains 2 units, pre-fitted and ready for action.
• Position and press. Let the epoxy cure cure without moving the unit or letting it be driven over. Typically, 2 to 4 hours is needed for setting, but we suggest doing this for 24 for full strength.