HIP Class3 Delineators Versus EG Class1 Delineators

This video showcases the difference between HIP Class3 and EG Class1. HIP Class3 delineators provide higher visibility and provide a longer reaction time.

• Higher visibility of our delineators saves lives
• Higher visibility provides road users with a longer reaction time.
• Safer for road users, road workers as well as construction workers.

SANS 1555 Requirements:

Delineators shall comply with the manufacturing and reflective requirements of SANS 1555. In addition, they shall also:

• Have blades that are reversible with dimensions as specified in the SARTSM and/or as indicated in the Contract Documentation.
• Be manufactured from durable, impact resistant plastic material.
• Have the lower edge of the reflective part of the delineator mounted at least 100 mm above the road surface.
• Be capable of withstanding the movement of passing heavy vehicles travelling at speeds of up to 80km/hr and gusting winds with a wind speed of up to 60km/h without falling over. The base area shall be at least 0,18 m² and ballasted by its own weight or with durable sandbags filled with fine, clean sand of adequate mass. (The sand bags shall be partially filled to ensure a flattish surface without bulging and they shall not be filled with anything other than fine, clean sand).